| WQ7C |
|
| Main functions | Two in one bus coupling (3-in-2), precise measurement, intelligent control, anomaly detection, reclosing, power-off reconnection, and four remote functions |
| display | LCD 128 * 64 pixels |
| language | Chinese/English/Russian |
| Working Voltage | AC power supply A1-N1/A2-N2, voltage range AC 185-255 V; |
| AC system | Three phase four wire, single-phase two wire, two-phase three wire, three-phase three wire (customized) |
| Total power consumption | 6W (standby mode: < 3W) |
| AC frequency | (50/60)Hz |
| Relay output capacity | 5A/250V passive output |
| Switch input interface | Effective connection to the common terminal (COM) |
| communication interface | RS485 isolation interface, MODBUS protocol |
| Protection level | IP55 (when a waterproof rubber ring is installed between the controller and the control screen) |
| Dielectric Strength | Apply an AC2kV voltage between the AC high-voltage terminal and the low-voltage terminal, with a leakage current not exceeding 3mA within 1 minute |
| Dimensions (mm) | 197mm×152mm×57mm(L×W×H) |
| Hole size (mm) | 186mm×141mm |
| working environment | Environmental temperature; (-15~+60)℃; Relative humidity: (20-90)% RH |
| weight | 0.7kg |
| Current and power display | not supported |
| Panel lock | support |
| Self investment and self recovery/Self investment but not self recovery | support |
| First priority/Second priority/No priority | support |
| Customize the startup interface | support |
| Forced disconnection | support |
| history | support |